Enjoy your time in the back yard with the 13′ x 13′ instant canopy. It provides 169 sq ft of cooling shade anywhere in just a few minutes. Simply extend the one-piece steel frame of this instant canopy, attach the vent and top, adjust the legs and you’re ready. This model features pinch-free buttons to make setup and adjusting the height quick and easy. This outdoor instant canopy offers 50-plus uv protection, so you’re covered even on the sunniest days. The unit includes a mesh pocket for small item storage and a large, four-sided ceiling vent for extra circulation. This instant canopy comes with a wheeled carrying bag, stakes and tie-downs that help you secure it in those rough weather conditions. It’s handy for camping, tailgating before sporting events, craft fairs, music festivals and many other events and activities. Get it in your choice of assorted colors. Instant canopy sets up in under 3 minutes. 169 sq ft of shade. Easy push-button system for quick setup and takedown. Heavy-duty polyester canopy and durable steel frame. Oversized, pagoda-style canopy with vented roof and a mesh pocket for small item storage. Strong, telescoping, 3-position steel frame and feet for use on concrete or dirt. Outdoor instant canopy gives you 50-plus uv protection. Includes wheeled carry bag. Measures: 13′ x 13′. Attention california residents: warning; this product contains chemicals known to the state of california to cause cancer, birth defects or other reproductive harm.
This item is made of durable 10oz waxed canvas. It has a vintage wool liner. All stitching is in heavy duty rot resistant thread. It is 18″ wide x 27″ tall. This is an entirely handmade/cottage craft item, there will be small marks from pins and tools used during the making of this item, all will fade with use and time. The sale is for the holder only. Take a tape measure and measure the circumference of, and width of, the rolled up items you want to carry, and check the measurements against mine, to see if your rolled up item is going to be a good fit or not. Thanks for stopping by.
Acrobat grill; it consists of a 29×25 cm (approximately) grill, pan holder and two hangers on one leg. The foot consists of 2 parts, it can be easily interlocked and has a lockable system. The product is made of the highest quality steel, 304 chromium-nickel, stainless, suitable for food contact, unpainted. It is both healthy and not affected by contact with fire, does not change color, does not scratch. Steel thickness is 10mm in main parts and 8mm in frames. It comes with a waxed canvas carrying bag which has pockets for every part. It can be easily carried in a backpack. It has a metallic dark gray color tone. The product weight is about 1250 grams. It is guaranteed for life. This item is made of stainless steel and waxed canvas, leather, steel.
This knife was made to capture the spirit of the small knives i have taken with me fishing and camping from my childhood to the present. It is enough knife for the most common tasks in the kitchen or the outdoors while weighing 60 g (2.1 oz) total or 32 g (1.1 oz) for just the knife. A knife with this design and construction is in my tackle box every time i go fishing. The blade is aeb-l stainless steel heat treated for higher toughness and has more thickness behind the edge than a typical paring knife would have. The tang runs most of the length of the handle to increase strength and stiffness. The handle is made from cast epoxy colored with mica powder with silicone overmolded for grip and impact resistance. Combined with the stainless blade and kydex sheath, this makes for a durable and highly water resistant package perfect for backpacking, hiking, or as a bird and trout knife. Blade: 75 x 16 x 1.5 mm (3 x 0.6 x 0.06). Overall knife length: 175 mm (6.9). Knife weight: 32 g (1.1 oz). Weight with sheath: 60 g (2.1 oz). If you have any questions about this knife or any of my other work, please feel free to reach out. This item is made of aeb l stainless steel and epoxy, silicone, kydex, paracord, mica powder.
The mat is made from 10oz waxed canvas and lined with vintage wool fabric. All stitching is in heavy duty, rot resistant, nylon thread. The dimensions are 32″x 27″ this is an entirely handmade/cottage craft item. There will be marks from pinning and marking, these will fade with use and time. Thanks for stopping by.
The head carved by hand in a piece of superbly grained crimson king maple wood and mounted on a superb twisted hazel shank. The stick is hyprid of cardigan stick. It is as such a one-off. The cardigan stick is a traditional welsh design this stick is based on that, but carved as a badger head, complete with fur detail. As can be seen from the picture above the stock can be used and is a very comfortable handle to hold the stick being held on the uncarved piece as shown. It will be fitted with a brass ferrule, once cut to the purchasers desired length. This stick is intended to be used as a normal stick. The handle is very comfortable to hold. The stick is approx 38 inches overall, and can be cut to required length upon request. I would like to stress that this head, unlike most others on etsy, is wood hand carved not cast resin. Each is therefore unique. I an unable to make two identical heads due to differences in wood grain and even things like my mood when carving. These are collectors sticks, each is unique and a piece of art. Hi steve received them this morning ive shot woodcock all my life mainly in the mountains of north wales my father was a woodcock man im a real lover of the bird i prefer the 2 first ones there abits more bulky and resemble almost exact size of a real woodcock head nothing wrong with the 3rd but just me i prefer the first 2 thanks. It is supplied with a brass ferrule unless one is not required, just ask. I have been making sticks for about five years now. I was taught by two of the best, imo, stick makers in the country. I make all the sticks myself, no plastic or resin, each is carved in solid wood. Usually i use lime but i sometimes make sticks in oak, ash, walnut and cedar of lebanon etc. All my sticks are made in my workshop here on the beautiful gower peninsular, all made within half a mile of the sea on the edge of the largest saltmarsh in europe. Hence my tendency to concentrate on birds we see on the marsh or in nearby woods. I do make other types of stick but bird sticks are my personal favourite. My stick have travelled the world, i supply a shop in boston usa as well as an outlet in scotland. I have a number of regular collectors and 90% or more of my sticks are made as commissions. When i get asked to make something unusual or new, i tend to make two so that in the event of an accident, and they happen often, i have another to proceed with. I do not have a website but you can see further examples of my work on facebook under wuzzlewood and on instagram. Why not follow me on instagram and see my new creations as i tend to post pictures of these regularly. Sometimes i can accommodate a rush job depending on my current workload. Thank you for showing an interest in my hobby. Sent from my iphone.
Bld roll top pack. This roll top pack is part of the first line of packs available from borderline designs made in the fall of 2020 in salt lake city, ut. Ideal for backpacking, hiking and camping. Roll top closure for easy access and variable capacity and compression. Hip belt for support and storage. Foam back pad with no frame for efficient weight and comfort. Made from lightweight yet durable laminate materials to withstand the elements and take a beating. Fit is size s/m with 18 torso length. This item is made of water resistant and lightweight, ultralight, gridstop.
Brand new design fully baffled, 800 fill power down. 90% down, 10% feathers. 74 in long, 54 at the top. Drawcord and snap at the collar to help cozy up. Weight is 25oz in a 10x 6 stuff sack. 20d rip stop material. This new design has a custom reflective heat retention fabric on the inside. This is a one of a kind feature in the market. Cozy up your camping.
Bushcraft knife, hunting knife, camping knife, custom and handmade knife. Handle : first class walnut. Total lenght : 8,66 inch (220 mm). Blade lenght : 3,94 inch (100 mm). Steel : n690bo (böhler company 60 hrc hardness) , 16 inch (4 mm). Knife grinding: nordic (skandi). Blade surface: polished stone. This item is made of n690 and böhler, walnut, steel, leather.