Dual Ping Pattern Spyderco PM3 NEW Relief Engraving Style Laser Engraved Copper Knife Scales EDC Gear Knife Install Optional
- add the ti hardware kit with the scales to install yourself. Choose the black blade complete knife with scales installed (comes with original black hardware, you will not receive the original g10 scales). Choose the satinblade complete knife with scales installed & ti hardware kit (you will not receive the original hardware or g10 scales if you select the installed option). You can also choose to have a clear coat applied to preserve the copper look you see in the photos and prevent the natural patina that occurs over time. Reminiscent of a golf putter pattern, the dual-ping design is relief engraved, with hours of laser work and polishing going into each scale. Over 200 passes for depth and to ensure that no detail is missed, scales are then lightly sanded and hand polished for smooth edges with a one of a kind feel. Engraved using one of our many fiber lasers in the shop. One of the many things we take pride in is providing engravings that last. These engravings will not rub off, but still feels good to the touch. Adds just enough texture to feel good in the hand. Scales are custom made, milled from copper to fit the spyderco para 3. They are 4.25 overall and weigh 3.25oz. There are many small parts and pieces on the para 3. It is not easy to take apart. Disassemble at your own risk. Both black and satin blade options are made with cpm s45vm blade steel. Titanium hardware kit includes everything you need to replace all visible hardware on your knife: pivot screws, body screws, pocket clip screws, stop pin, barrel spacer, and lanyard tube. The only stock piece this kit won’t replace is the pivot barrel – steel performs better than titanium for this part and you definitely want to keep that drop-shut action this hardware kit weighs about 0.11 oz. Installation of the hardware kit requires some basic tools and knowledge, the pivot can be tough to remove. Titanium screws require a little finesse as they are not as strong as steel screws, high quality torx bits are recommended to ensure the best experience. Hardware kits are not made here, these are flytanium brand, and we are not responsible if you are unable to properly install them on your knife.